Swimming pool maintenance is one of the factors that you should keep constant with the checklist being given priority.
Pool checks continuously will enable you to have good control of your swimming base. In case of an algae outbreak, you can easily locate the defective area.
Damage like leakages, broken tiles and filter blockages are problems that arise due to a lack of proper pool maintenance.
Human injuries can also arise due to these factors. You should ensure that it's properly checked before using the swimming pool to avoid these uncertainties.
Proper pool maintenance will ensure that everyone gets comfortable accessing it. The checklists act as safety measures and guides.
The following steps will help you during the weekly maintenance of your pool.
7 things to consider when maintaining your swimming pool
- Keep the deck clean and free of debris.
- Shock your pool.
- Check the water level of your pool.
- Check the ladder tension.
- Replace the cartridge elements.
- Check on the filtration system.
- Check the baskets for leaves.
Step No. 1: Swab the deck.
When looking for a pool, it's great to go for the clean one. You should maintain it by scrubbing and washing around the area. You must clean and get rid of the debris or mud that may end up in the pool. This avoids situations such as contamination and cloudy water.
Moreover, proper maintenance of a swimming pool increases the chances of people coming over to your pool, if you are using your pool for commercial purposes.
Step No. 2: Shock your pool.
Shocking the pool means adding chemicals to destroy any bacteria in the pool.
This step is pretty good because it reduces the chances of contamination. You should do it every week depending on the amount of use your pool gets. Especially during summer, you may need to shock more than once per week.
It is prudent to shock your pool after occasions such as parties or heavy rainfalls. This way, you get rid of contaminants in the water.
The amount of the chemicals you are supposed to use depends on the water PH. This is because it may lead to infection in the skin and then cause itchiness or irritation if you use too much.
Step No. 3: Check the water level of your pool.
The water level is another factor you should check when maintaining your pool. During heavy rainfall, the water level of the pool may increase gradually.
You will have to pump it out to avoid overflowing the pool water when this occurs. A lot of water in the pool will flow out and even lead to the breakage of terminals.
There is always a mark on the wall line when constructing a pool. This denotes the optimal water level that should be met.
The inground pools water levels should be half the skimmer plate. This will prevent the drowning of children when they use the swimming pool.
Step No. 4: Check the ladder tension and swimming safety equipment.
These safety measures are of the most importance. When maintaining a pool, checking the bolts if they are tightened is a must step.
The diving board bolts or the ladders get loose at times due to people jumping and sliding on them. Tightening the bolts will ensure a safe environment so no one is injured.
With loose bolts, the higher the risks of falling or the occurrence of injuries. Make sure to keep safety equipment available in case of emergency.
Step No. 5: Replace the filter elements.
The filters need to be checked regularly. Having new filter cartridges ensures the filters trap dirt from contaminating your pool.
Faulty cartridges lead to blockage of the filters and eventually cause an overflow, or overworking the pump. They will not be able to work well forever, so check them regularly.
Lubricating the O-rings and tuning the pool cleaners will ensure the pool runs smoothly without any default.
Aside from routine cleaning of the filter elements, check whether they need replacement. Always have a spare, so you are not caught off-guard.
Step No. 6: Check the filtration system.
The filtration system determines how the circulation of the swimming pool water works. It also keeps the water crystalline and transparent by retaining dirt.
The filtration system should be closely monitored to ensure no blockage. Pool filters eventually stop working if they are full of dirt. Your pool should circulate clean water at all times.
The system should be able to clarify the water which has suspended particles. It simply passes it through a porous material and comes out clean.
It ensures that there is no proliferation of materials like algae. The closed-circuit circulation should be guarded and maintained closely.
It is recommended that you filter the pool water at least 8 hours a day during the summer for the filter to work effectively. Less time might be appropriate during winter.
Step No. 7: Check the baskets.
You should keep checking the pump baskets every week. It has a clear lid so you can easily identify if it is full.
The skimmer baskets should be emptied so that the suction part remains intact, effective, and strong. Make sure to check more often if you have a strong wind storm that blows extra debris into the pool.
You should also ensure that the basket is basically in the right area before it starts functioning.
Ask the professionals
Pool maintenance may seem like a one-person task, but it needs a lot of manpower. If you don't have the time (or willpower) you need professional help to ensure your pool looks appealing at all times.
Call the professionals at Clean Living Pool and Spa.
They provide various pool cleaning services like pool consulting, maintenance, repair, and weekly checkups. You can never go wrong with Clean Living Pool and Spa.
Do get frustrated trying to keep your pool clean all alone. Reach out to Clean Living Pool and Spa here or call (702) 539-3927 now!
.png)
